DIY Aerogarden Pods The Best Guide + Pro Tips 2023

Let’s check our DIY aerogarden pods’ instructions. Recently, many folks have requested me to create an instructional guide on how to create your own seeds. I’ve considered that most of you do not are looking to learn how to in order to cut costs. Many of you want to cultivate your own veggies, herbs, and more. without the use of plastic. I understand that. The main reason I began this blog is that I am a lover of nature.

I have had conversations with a couple of members of “premium users” as well as looked on the internet to determine the best way that is possible. This tutorial is my findings from my investigation! Do you have any feedback for me in the comments section if you choose to test my method?

CAUTION! Making the seed pods yourself requires cutting and drilling holes using a an object that is sharp! Be mindful. It’s always safer to wait slightly longer rather than causing injury while hurrying to finish.

Today, I’m going to demonstrate an approach I’m testing out at present, however, it seems like quite a good idea…like it could be effective. I’ll keep you informed about how it performs however, you’re probably interested in knowing the method I used.

I’ll describe the entire procedure in step-by-step instructions.

DIY AeroGarden Pods

Materials for DIY AeroGarden Seed Pod

If you’re using the AeroGraden System already, you probably have come across the various components in the pod. I usually use a variety of these components in the event that they’re not damaged.

Reusing the pods is more sustainable than purchasing new pods every time and discarding the old ones.

For a pod that you can make yourself Here is an essential you’ll require to create seeds:

• Growing Basket is made from any kind of material such as aluminum or plastic (perforated cone-shaped)
• Growing Material, also known as Sponge could be substances such as sponges or peat moss
• Growing Covers or Dome – Dome or hood that is transparent

1. In The Form Of The Aluminum Cylinders

When you have your grow sponge DIY and the seed pod caps (whether already saved or made up) It is now time to build these grow bags. To minimize the waste of plastic I’ll shape aluminum into cylinders, and then use them to make grow baskets.

To do this, you’ll require baking trays made of aluminum that are heavy-duty. They are extremely cutting when they are cut and it is important to be careful. Make sure you take your time cutting and shaping them. It’s fine to take more time instead of risking injury.

AeroGarden grows baskets are AeroGarden grow baskets that measure three inches in length. The bottom of the basket is narrow, less than 3/4 inch, and the largest part, taken across is 1 and 3/4 inches.

The aluminum tray should be cut using scissors to alter it to the same dimensions as the growing basket quickly.

Make small slits, then fold the foils inwards to form the shape of a circular. Then, create an elongated circle with a rim at the top by making use of slits that are small until you can form it to dimensions.

The rim should allow the seed pods you made yourself to be able to fit snugly into the AeroGarden without slipping out. Fold the tips inwards (cut them before) to make a strong edging for the broad top.

You can also make use of a film canister that has been discarded to make a growing basket (a 35 mm canister is ideal) or cut out slits through it using the help of a sharp knife or circular tool. Be sure to fit it perfectly.

It is important to ensure that it fits well. Mesh net cups can be used as holders for plastic. They can be cut in two places at the top and bottom to form them into a shape.

2. Sponges for Create Grow

This is a crucial step to growing the plants you desire. AeroGarden Sponges are composed entirely of Canada Sphagnum Peat.

However, it’s not the only substance that can help the growth of plants. I favor peat moss since it’s cheap and easily available. There’s also rockwool to make use of. In this article, I’ll go over how to use peat moss to create the sponge’s base.

All you need to do is to pour a small amount of peat moss into a bowl and then add water slowly to moisten it. Once they’re completely soaked then you can begin folding them in your hands and form the shape of a pod.

It is then that you will know that the mixture is ready to mold. You can choose either of those aluminum pans and put the mix in. After pressing it into your mold take the excess water out.

It is then possible to take the mold off and let it dry until it begins to become a more solid shape. After drying it will take on a form similar to that of an original AeroGarden sponge. It is now ready to store the seed and sprout when it is placed in the AeroGarden.

These homemade seed pods made from wood are great to place inside the AeroGarden kit kits for seed starting.

I wouldn’t suggest using the regular sponge, either. The material the sponge is made of doesn’t make it ideal for the growth of seeds. There will be more failures in seeds than you will see growth.

Step 3

You’ve got the two primary parts ready and if you wish, you could add your seed to the sponge or put it off until later. I’d suggest that you do this before putting the sponge into the aluminum cylindrical.

Then, place the sponge in the pod and check how it fits. If you’ve cut the correct size, you may need to squeeze it in just a bit. If the sponge is large it is now the ideal moment to cut it down to the correct size. Your sponge’s size will influence the final outcome of your product as well as the harvest you will get in the final stage.

4. Wind The Hoses

Once the sponge is in after which you need to extend the slits you cut in the beginning so that nutrients and water go in and reach the seed. It is also recommended to leave the bottom of the container open to allow any water that is able to get inside will be drained down.

5. Cover With Aluminum Foil to Protect the Pod

The next step is to need to cut an aluminum foil square in a size that is enough to completely cover the pod’s top. Place the foil over the top of the pod, by folding the sides in such a way you can ensure that the foil can remain on top at all times. Once you’ve got this covered then you need to cut another hole at the top of the aluminum foil. In the middle. The hole should allow the seed to expand up.

6. Wrap The Pod In The Cap

The final step is that you’ll need to take the already utilized seed pod cap you received when you purchased the earlier seed pod kits. If you’ve taken the time to create your own seed pods from aluminum then the caps will be able to fit, however, should they not you can stretch them until they fit.

The great thing about working with an aluminum pod that is thin is that it can be shaped in any way you want and it won’t break.

7. Final Assembly

Combine everything. Put the seed-growing sponge or the material into the growing basket that you have already made. Be sure to insert your seeds inside the basket.

Cover the seed pod with a transparent dome to encourage the seeds’ germinate process. I will put the dome on until the seeds begin to germinate.

What are AeroGarden’s Pods Made of?

The AeroGarden domes and grow baskets are made from plastic while the seed plugs and those for growing sponges are constructed from pure Canadian sphagnum peat. The labels for growing are made from paper.

The issue with Sphagnum Peat Moss is that it’s not renewable which makes it detrimental to the environment in the long term, particularly in the way the plant is harvested.

Therefore, when you purchase seeds that are sold in stores it is important to be aware of the ways you’re doing to the earth. Seed pods that contain plastic or Peat Moss aren’t suitable for the natural environment. So, you should do your part by looking for alternatives.

Look also — What Are Best Plants To Grow In Aerogarden + Top-6 Seed Pod Kits

Can You Use Any Seeds In An AeroGarden?

With the Grow Anything Kit, you can make use of your own seeds to grow in an AeroGarden. Since the kits come pre-sewn, they are simpler to use because they’ve been tested for success in hydroponics. But, the fun lies in trying new things.

The most important rule to remember is that any plant that grows above the surface can be grown in an AeroGarden. In reality, some plants are more apex than others, so although you can utilize AeroGarden to begin the process, you’ll need to plant them outside later to ensure that they continue to grow optimally.

To ensure the growth of different plant seeds, it is possible to opt to purchase models from AeroGarden that come with different heights for growth between 12 inches and 24 inches. The plants that are bigger will naturally thrive in taller models.

In theory, you can plant any seeds you want in an AeroGarden in the event that you do the things that are essential to ensure optimal development. To do this you should check out the seed packs. The package will have details on how big the plant will get once mature, as well as how to care for it.

Can You Reuse AeroGarden Sponges?

After the roots have grown in the grow sponges you’ll not be able to reuse the sponges. The plastic parts – the dome and the growing basket can be reused after a thorough cleaning. But, the sponges have to be changed.

Although it’s not recommended for reuse, the best method to reuse sponges is to do it when the seeds fail to work. With no functioning roots, it might still be capable of planting new seeds and then praying for the sponges to be successful. Therefore, it’s always best to buy new sponges. For greater sustainability, you can use alternatives mentioned in this article.

In this guide, I’ve attempted to come up with a pocket-sized and eco-friendly way to utilize your AeroGarden. If you try this DIY please leave a comment on the experience.

DIY AeroGarden Seed Pods and Pods Final Ideas

Designing your personal DIY your own AeroGarden Pods and System will be affordable and easy to make. Although you’ll need to put in the time and effort for the installation and setup it’s worth it to provide fresh herbs and vegetables throughout the year.

DIY Seed Pod AeroGarden systems provide you with the same thriving plants that are available in the ready-made AeroGarden systems that provide a steady abundance of fresh vegetables, herbs as well as beautiful fruits and flowers. It’s an excellent option to get started with indoor gardening for novices.

I’m still a fan of buying an AeroGarden system for myself, as it will be much easier to resolve issues because there’s a larger community. It also makes things much easier and helps me save lots of time. I can then use the time for other activities like eating fresh vegetables and fruits!

DIY Aerogarden Pods FAQs