In this article, you will learn step-by-step instructions on how to clean aerogarden with plants in it…
- The Time When you Should Start Taking Care of Your AeroGarden?
- Tools and Solutions to Maintain Your AeroGarden
- A Complete Step-By-Step Guide to Clean the AeroGarden
- Step 1 – Switch off the Aerogarden
- Step 2 – Strip off Your AeroGarden
- Step 3 – Prepare Vinegar Solution
- Step 4 – Sanitization Of The Bowl
- Step 5 – Dust, or Rub Off The Parts That Are Sensitive
- Step 6 – Clean and Wash Your Pump Filter
- Step 7 – Removing AeroGarden Components in a Vinegar Solution
- Step 8 – Reassembling the AeroGarden
- How To Clean Aerogarden With Plants In It FAQs
- What If There Is Algae On (or In) My AeroGarden?
- What Causes Algae And How To Prevent It?
- What Is That Brown Crust on The Grow Deck?
- Do I Have To Bleach or Vinegar for Cleaning?
- How Often Should You Clean Your AeroGarden?
The Time When you Should Start Taking Care of Your AeroGarden?
It is recommended to wash your AeroGarden following every full harvest. If you’re not sure when the harvest is finished, look for plants that aren’t producing fruit or flowers. This means that dormancy has started and is the perfect time to take down and clear your entire system. If you’re growing leafy vegetables or lettuce in your AeroGarden and you see blossoms that are beginning to appear. This indicates that your plant has begun “bolting” and trying to grow seeds. Greens and lettuce that are gone to seed produce an unpleasant taste that ensures that the seeds have a chance to sprout. This is not something you’d like to put on your meal, therefore, you can eliminate the plant.
Another method to get rid of the dirt in your AeroGarden is while you are in the middle of growing your plants are still growing. Sometimes, leaves, dirt, or other debris can be thrown onto the top of your tray. This can be very annoying particularly if you own a white model, such as AeroGarden Harvest. AeroGarden Harvest. If this is the case, simply wipe the top of the tray with a damp paper towel or lightly remove any dry debris. Don’t make use of harsh chemical cleaners or soaps in the middle of a clean-up since they can damage your plants.
We suggest that when you clean your AeroGarden make sure to use safe cleaners such as bleach and distilled white vinegar. While bleach might seem harsh, it’s akin to chlorine that’s found inside tap water. In contrast to other bio-based cleaners, bleach doesn’t leave behind chemical residue after being rinsed. If you are unsure, use the tried and tested! If you’re not sure about bleach, you can try distilling vinegar. If you fail could be that you have a weirdly-smelling dressing in your hand.
Tools and Solutions to Maintain Your AeroGarden
- white Vinegar If you’ve decided to clean your AeroGarden with plants within it, I strongly suggest making use of white vinegar as a cleaning agent. Is there something particular that is unique about white vinegar? As mentioned earlier, white vinegar is natural and gentle in action and organic. It’s free of chemical substances and aids you in thoroughly cleaning your home even when you have plants within it in complete confidence and security.
- Medium-sized to large-sized plastic bowl and spoon Do not skip the use of an item that holds a minimum of 01 gallon of drinking water, or even more. It’s used to make a cleaning solution to clean AeroGarden and its components. Regarding the spoon, it’s utilized to mix vinegar thoroughly in water.
- Soft Towels Soft Towels: soft towels are used to clean dust and other agents that cause disease from the components of the AeroGarden which aren’t immersed within the solutions, for example, the touch meter, light hood, etc. This tool will allow you to make sure that you’ve clean the delicate parts of the AeroGarden and also.
- White TowlesWhite paper towels are crucial to wash off the unreachable parts of the AeroGarden including beneath the growing surface and around the seed pods.
A Complete Step-By-Step Guide to Clean the AeroGarden
Have you bought the tools that were mentioned earlier and the products on the market?
Congrats! You’ve all the equipment you require for your AeroGarden cleaning process.
Let’s go deep into how to go about the cleaning process itself.
Before that, I’ll remind you to go through the AeroGarden user’s manual and double-check the instructions labeled to avoid any issues with or inside the system.
Step 1 – Switch off the Aerogarden
Before you start to wash your AeroGarden the first thing you must do should be to shut off the power source. power source.
Step 2 – Strip off Your AeroGarden
Follow the instructions and guidelines found in the user’s manual Disassemble Your AeroGarden into smaller pieces to clean.
- Make sure that the water pump stops working and remove the power cord.
- Then lift the light hood and remove the water container to raise it off the grow deck.
- Set your grow deck in the basin. Careful not to hurt plant roots.
- Get rid of the AeroGarden bowl and empty it of all water.
- Take pods off on the grow deck. Be careful not to squeeze the pods’ sides.
Make sure that you’ve removed any leftover components from the system prior to soaking it into the cleaning solution.
Step 3 – Prepare Vinegar Solution
The two vinegar along with bleach can be utilized to make cleaning solutions. Personally, I favor vinegar because it’s a natural option.
Take 01 gallons of warm, filtered water. Add 1 teaspoon of white vinegar into the water and mix well with a spoon made of plastic.
Bleach and vinegar solutions are required to cleanse all parts of your disassembled parts.
After that, you should dip all of the deconstructed AeroGarden components in white vinegar or bleach solution and let them sit in the solution for approximately 25-30 minutes. This will ensure that the solution kills every fungal, pathological, and bacterial disease.
NOTE: Use a plastic bowl or container that will accommodate at least 01 gallons of water, along with all the other disassembled parts.
Step 4 – Sanitization Of The Bowl
The term “sanitize” refers to “make an area clean and hygiene-conscious or clean up.”
The Bowl of the AeroGarden is an essential component of the system. Hence it is essential to wash it in order to make sure that there are no bacteria or any other pathogens present.
Because of the constant fluidity of the water inside the bowl, There are some fungal or bacteria spores that may be created on the interior of the base.
To clean it, remove the water from the bowl until the very last drop. After that, add 3/4 full warm water mixed with 1/2 cup of white vinegar or bleach.
Switch off the fan, and let for the vinegar or bleach solution be running for about 5 minutes before turning off the motor.
Then, remove all the solution from the AeroGarden base and wash it with running or filtered fresh water for a while.
Do not forget to rinse the entire bowl prior to adding either filtered or distilled water to the cleaned bowl.
Step 5 – Dust, or Rub Off The Parts That Are Sensitive
The fifth and most important step is to clean or dust the delicate parts, light hood, touch meters, and so on. which can’t be submerged in the vinegar or bleach solution.
To do this, make use of soft towels, as mentioned to wash the delicate components within the AeroGarden.
Careful when washing your light hood as it’s fragile and susceptible to damage.
Be patient and let the affected parts get dry.
Step 6 – Clean and Wash Your Pump Filter
Take a look at this, how can you cleanse and wash and clean the pump filter?
There’s no need to be worried!
Here’s how to cleanse your AeroGarden pump filter: First and foremost, untie the pump filter from the stand and clean it with the brush. This will let you remove the ties and all roots present.
After cleaning your pump filter, use a soft towel to clean off the pump stand. Don’t forget to remove roots with the brush.
Step 7 – Removing AeroGarden Components in a Vinegar Solution
After submerging AeroGarden pieces into the vinegar solution for about 20 to 25 minutes, it’s now time for you to separate the submerged pieces from the solution you prepared.
The next step is to wash the parts with fresh running water to make sure that you’ve removed the vinegar or bleach solution until the very last drop.
Lastly, place all cleaned components on the clean towel and let them dry.
To ensure that the components are clean, wipe them using a clean paper towel.
Step 8 – Reassembling the AeroGarden
Congrats! You’ve completed your AeroGarden washing, cleaning as well as the cleaning process.
Now is the perfect time to assemble parts disassembled parts.
Here’s how you can reassemble the parts that have been disassembled:
- Utilize the instructions manual or user guide to ensure that you have assembled AeroGarden components. AeroGarden components.
- Use the correct technique and be careful not to apply excessive force or push on any part of the device.
Make sure you’ve assembled the parts correctly, your AeroGarden will run without a hitch. However, if it fails to start or work properly, make sure all the parts are packed properly and are placed located in the correct place.
Helpful Tips While Cleaning
Here are some suggestions to help you answer any other concerns you might have.
Look also – Best Pitchfork For Mulch 2022 Top Picks
Harvest Your Herbs Before You Start
Before you start you can either take a full harvest or give your herb a slight pruning.
The majority of the time you’ll need to clean in between plantings, but occasionally an annual mid-cycle clean is necessary. In this instance, it is important to work with clean plants that can help make this whole process easier
How To Clean Aerogarden With Plants In It FAQs
What If There Is Algae On (or In) My AeroGarden?
Algae might develop within the bowl of water, within the holes in your AeroGarden or your grow deck, or around the seed pods. This is normal and will not harm your plants in the long run, provided it’s not too much.
What Causes Algae And How To Prevent It?
Algae grow when light and water are in contact. This is the case in all hydroponic systems. The nutrients actually help the growth of the algae.
To remove dirt, simply wipe it off with an unclean cloth or damp paper towel. Replace the reservoir’s water.
The blocking of light into the water basin could reduce the growth of algae. It is possible to purchase plant spacers to block any holes that are not being used to block light.
What Is That Brown Crust on The Grow Deck?
The edges of the cells that are planted on the grow deck may start accumulating brown “crust” or sediment as your plants grow. It’s the residue left from fertilizer. Although it may look dirty, it’s not going to harm your plants. It’s also quite common if you’ve had your plants for a long time.
As water flows through the body and lungs of AeroGarden it is possible that some fertilizer is released through its plant cells. It is then deposited on the top of the growing deck and leaves behind a brown color. The brown residue is the result of calcium buildup caused by The Liquid Fertilizer.
Although it’s not dangerous, you can get rid of it by using a small amount of white vinegar and baking soda or CLR, the calcium, Lime, and Rust remover. Make use of a small brush to loosen and eliminate the buildup of minerals.
Maintain the water level just lower than the fill line in order to avoid this occurring. Lower levels of water can stop the water from bursting within cells of the plant cells.
Do I Have To Bleach or Vinegar for Cleaning?
You don’t. Aerogarden suggests that you use one or the other method to get rid of any bacteria and organic matter that has accumulated. Some people have their gardens cleaned with just water and have good results.
If you’re experiencing any chemical sensitivity You can test it too. If you don’t have the product in your house, don’t skimp on the washing. A couple of cycles of growth with water and an unclean towel or sponge is sufficient.
How Often Should You Clean Your AeroGarden?
At a minimum, be sure to clean your AeroGarden each when it is time to plant fresh pods.
Alongside cleaning between plantings, it is recommended to also change the water every 4 to 6 weeks.
You don’t need to do the full sanitizing process as the one described above. You just need to remove the water from the tank, wash out the bowl and then fill it with pure water.
This is the recommendation of AeroGarden. They’ve conducted several studies and have proven the fact that plants grow stronger and healthier when water is replaced frequently.